gareth
Admin
|
Re:floppy disk for panasonic palmcam 4090 digital - 2007/07/01 19:46
Hi there,
The only Panasonic Palmcam 4090 I was able to locate was the PV-SD4090 - is this the camera you have? (The model number should be written somewhere on the camera itself)
If so, you can download the files from the floppy disk from ftp://ftp.panasonic.com/pub/Panasonic/Drivers/capture/PVSD4090.ZIP
Instructions for using the file are at the bottom of this post.
Thanks for your question! If you can't get the drivers installed and would like to make an appointment with a digital camera technican to come and install the camera for you, please don't hesitate to give us a call or e-mail.
Kind regards,
Gareth
Global Village Networks LLC
------
Driver Information
------
PV-SD4090 SuperDisk™™ PalmCam® Camera device driver software for Windows 2000 and Windows XP (1.98KB; 5/00)
Please follow the directions below to install it.
1. Click the link above to download this file to a directory on your hard drive or on a blank formatted floppy disk. This file contains zipped (compressed) files needed for installation.
2. Go to the directory where you saved this file, and double-click on it.
3. Unzip (un-compress) the files to a directory on your hard drive or floppy disk.
4. Connect your PalmCam SuperDisk™ Camera to your Windows 2000/XP PC (via the included USB cable).
5. Turn the camera ON and Windows 2000/XP will detect that a new USB device has been connected and will ask you for the driver (Usbsdd.inf) location.
6. Go to the directory where you unzipped the files, and specify the file named "Usbsdd.inf."
7. Windows 2000/XP will then automatically install the driver (Usbsdd.inf) for you.
*** The SuperDisk™ driver from the camera's box does not need to
be installed.
|
